|1||Special Order||Slab & Tile||According to the order||2cm >||According to the order|
Yellow or lemon Azarshahr travertine has yellow and sometimes Orange color. It has a high pressure resistance & permanent color which makes it to be easily rubbed. It can be sawn in vein cut & cross cut shapes in tile & slab dimensions. It’s very applicable in interior spaces as well as main facades, landscaping structures & flooring due to its permanent color & high pressure resistanc.
Digital image color may vary from actual slab coloration. Photos are examples only. Actual stock changes frequently. Please contact your Shaar Stone Sales Consultant to view photos of slabs currently in stock. Each slab will have different characteristics. It is recommended that slabs be inspected prior to purchase.
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
This material has a medium to high absorption rate. Always seal this material prior to use. Properly seal the material prior to grouting by applying several coats of sealant or until water beads up on the surface. Use Fila PRW200 to avoid staining from grout residues and specify a grout color that is similar to the color of the stone to avoid color bleeding into the material. Use low moisture setting materials. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material.
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.