|1||Special Order||Slab & Tile||According to the order||2cm >||According to the order|
chocolate travertine which sometime is called Aghamohamadi travertine is one of the most valuable natural stone in the world. It can be supplied in both vein cut & cross cut in tile & slab dimensions. high density & low porosity makes it suitable for pavements. Aghamohamadi chocolate travertine is applicable for every parts of building, due to its permanent color & high polish acceptance.
Digital image color may vary from actual slab coloration. Photos are examples only. Actual stock changes frequently. Please contact your Stone Source Sales Consultant to view photos of slabs currently in stock. Each slab will have different characteristics. It is recommended that slabs be inspected prior to purchase.
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
This material has a medium to high absorption rate. Always seal this material prior to use. Properly seal the material prior to grouting by applying several coats of sealant or until water beads up on the surface. Use Fila PRW200 to avoid staining from grout residues and specify a grout color that is similar to the color of the stone to avoid color bleeding into the material. Use low moisture setting materials. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.